Tag Archives: Plumbing Courses Near Me Hodges AL 35571

Where to Find Accredited Training For Plumbers Hodges AL

How to Pick the Right Plumber Course near Hodges Alabama

Hodges AL plumber fixing faucetThe initial step to learning to be a plumbing tradesman or contractor is finding a plumbing school near Hodges AL. But with so many technical schools to choose from, just how do you go about making sure that you enroll in the right one? Particularly since there are so many variables to examine. For instance, many students will start by searching for schools that are nearby their home. After they have located some that are within driving distance, they will pick the one with the least expensive tuition. Even though location and cost are of importance, they are not the sole factors that should be evaluated. Also important are the accreditation and reputations of the schools, as well as their job placement and graduation rates. These and additional qualifications should influence your final decision when selecting a plumbing trade school. We will cover that checklist in greater detail later in this article. But to begin with, let’s review a little bit about becoming a plumber and the educational options that are accessible.

Becoming a Plumber

Hodges AL plumber installing residential water heaterAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Hodges AL plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Hodges AL plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Hodges AL is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Hodges AL plumber installing sinkThere are several educational options available near Hodges AL to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

What to Ask Plumbing Technical Schools

What to ask Hodges AL plumbing schoolsNow that you have made a decision to obtain a certificate, diploma or degree, you can start to narrow down your school options. Considering that there are numerous plumbing tech and trade schools in the Hodges AL region, it’s imperative to have a checklist of qualifications that each program must meet. The initial two that we mentioned were location and the cost of tuition. And while both qualifiers may be crucial when making your selection, there are additional variables that need to be taken into account also. Below is a checklist of those additional qualifiers that you will need to assess before enrolling in a plumber vocational school.

Is the Plumbing School Accredited?  Many plumbing vocational schools have acquired either a regional or a national accreditation. They may earn Institutional Accreditation, which involves the school’s programs overall, or Programmatic Accreditation, which pertains to a specific program, such as electrical technology. Make sure that the Hodges AL school and program are accredited by a U.S. Department of Education recognized accrediting agency, for example the Accreditation Board for Engineering and Technology. In addition to helping make certain that you acquire an excellent education, it can help in acquiring financial assistance or student loans, which are in many cases unavailable for non-accredited schools. Furthermore, some states mandate that the plumbing training course be accredited in order to qualify for certification or licensing.

Is the Plumbing School Licensed?  In addition to accreditation, another way of determining if a vocational school you’re reiewing is reputable is by making sure that it’s properly licensed.  Licensing is typically regulated and controlled by state agencies, such as the Alabama Department of Education.  If you don’t know, ask the school which state agency is responsible for its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Hodges AL schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing schools you are reviewing what their completion rates are. The completion rate is the percentage or portion of students who enroll in and finish the course. A lower completion rate may signify that students were disappointed with the program and quit. It may also signify that the instructors were not competent to instruct the students. It’s also imperative that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of graduates, which may result in more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate will not only affirm that the school has a good reputation within the trade, but additionally that it has the network of contacts to assist grads obtain apprenticeships or employment in the Hodges AL area.

Are Apprenticeship Programs Sponsored?  Numerous plumber vocational programs are taught along with an apprenticeship or an internship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing businesses or trade unions. Ask if the schools you are considering have referring partnerships with local Hodges AL plumbers or plumbing companies. An apprenticeship not only provides a valuable experience by providing hands-on training, but it also furnishes employment opportunities and helps to build relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the equipment that you will be instructed on are up-to-date and what you will be working with on the job. If you are presently in an internship or an apprenticeship, check with the master plumber you are working with regarding what you should be expecting. Otherwise, ask a local Hodges AL plumbing company if they can give you some suggestions.

Where is the School Located?  Unless you can move, the school needs to be within driving distance of your Hodges AL home. Remember that if you decide to enroll in an out-of-state school, besides the added relocation costs there can be higher tuition fees compared to in-state residents.

Are there Smaller Classes?  It’s desirable that you receive as much one-on-one training as possible, which can be challenging in bigger classes. Ask if you can sit in on a couple of the classes so that you can see how big they are and witness first hand the interaction between teachers and students. Talk with several of the students and get their comments regarding class sizes and instruction. Last, speak to a few of the teachers and learn what their level of experience is in Hodges AL and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Confirm that the class schedules for the programs you are evaluating are flexible enough to meet your needs. If you can only go to classes at night or on weekends near Hodges AL, check that the programs you are comparing provide those options. If you can only attend on a part-time basis, make certain that the school you select offers part-time enrollment. Finally, check out what the policy is to make-up classes should you miss any because of work, illness or family emergencies.

Where to Find Accredited Training For Plumbers Hodges Alabama

Hodges AL plumbing contractor installing faucetChoosing the right plumbing trade school will undoubtedly be the most important decision you will make to start your new profession. You originally came to this website because of your interest in Where to Find Accredited Training For Plumbers and wanting more information on the topic Where to Find Accelerated Plumbing Training. But as we have discussed in this article, there are a number of things that you will need to examine and compare between the training programs you are looking at. It’s a must that any plumbing tech school that you are assessing includes a good deal of hands-on instruction. Classes should be small in size and each student should have their own equipment to train with. Classroom instruction should provide a real-world perspective, and the training program should be current and conform with industry standards. Training programs vary in duration and the kind of credential offered, so you will have to ascertain what length of program and degree or certificate will best fulfill your needs. Each program provides unique possibilities for certification as well. Perhaps the best way to research your short list of schools is to go to each campus and talk with the students and faculty. Take the time to monitor some classes. Inspect the campus and facilities. Make certain that you are confident that the program you choose is the best one for you. With the proper training, effort and commitment, you can become a professional plumber in Hodges AL.

More Alabama Plumbing School Locations

  • Accredited Plumbing Trade Schools Eclectic AL
  • Become A Plumber Buhl AL
  • Where to Find Weekend Plumber Classes Near Me Tuscumbia AL
  • Where to Find Night Plumbing Training Rainsville AL
  • Where to Find Online Trade Schools For Plumbers Muscle Shoals AL
  • Where to Find Weekend Tech Schools For Plumbers Troy AL
  • Where to Find Fast Track Plumbing Courses Leeds AL
  • Where to Find Accredited Plumber Training Heflin AL
  • Where to Find Night Plumber Courses Near Me Sheffield AL
  • Where to Find Accelerated Training For Plumbers Pennington AL
  •  

     

     

    Hodges, Alabama

    A community known as "Reid Brake" was established at what is now Hodges in the 1880s. The current town was established in 1907 as a stop along the Illinois Central Railroad and named for a prominent local family. The town incorporated in 1913, and reincorporated in 1919.[5]

    Hodges is located in southern Franklin County at 34°19′49″N 87°55′39″W / 34.33028°N 87.92750°W / 34.33028; -87.92750 (34.330242, -87.927394).[6] The southern border of the town follows the Marion County line. Alabama State Route 172 passes through the town, leading northwest 9 miles (14 km) to Vina and southeast 7 miles (11 km) to Hackleburg. Alabama State Route 187 leads northeast from the center of Hodges 13 miles (21 km) to Belgreen.

    According to the U.S. Census Bureau, the town has a total area of 4.1 square miles (10.7 km2), of which 0.01 square miles (0.02 km2), or 0.15%, is water.[3] The town sits on the Tennessee Valley Divide, with the east side draining to Bear Creek, a north-flowing tributary of the Tennessee River, and the west side draining via Skirum Branch to Bull Mountain Creek, a west-flowing tributary of the Tombigbee River. 2 miles (3 km) north of Hodges is Rock Bridge Canyon Park, on bluffs overlooking Bear Creek.

     

     

    Business Results 1 - 10 of 3

    Ray Miller Plumbing
    4 Reviews
    Plumbing, Water Heater Installation/Repair, Septic Services
    Phone:
    Tupelo, MS 38801

    Roto-Rooter
    1 Reviews
    Plumbing, Septic Services
    Phone:
    106 E 18th St, Columbia, TN 38401

    Hughes Brothers Plumbing
    1 Reviews
    Plumbing, Irrigation, Contractors
    Phone:
    99 Hughes Dr, Byhalia, MS 38611