Category Archives: District of Columbia

Where to Find Part Time Plumbing Classes Near Me Washington DC

How to Pick the Right Plumbing Tech School near Washington District of Columbia

Washington DC plumber fixing faucetThe first step to learning to be a plumbing contractor or tradesman is locating a plumbing school near Washington DC. But with so many vocational schools to choose from, just how do you undertake making sure that you enroll in the right one? Especially because there are so many points to examine. For instance, some potential students will begin by searching for schools that are close to their residence. Once they have identified a few that are within driving distance, they will pick the one with the lowest tuition. Although location and cost are important, they are not the only things that must be considered. Also critical are the accreditation and reputations of the schools, in addition to their graduation and job placement rates. These and other qualifications should influence your ultimate judgment when selecting a plumbing training school. We will address that checklist in more detail later in this article. But first, let’s review a little bit about becoming a plumber and the educational choices that are offered.

Becoming a Plumber

Washington DC plumber installing residential water heaterAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Washington DC plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Washington DC plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Washington DC is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Washington DC plumber installing sinkThere are several educational options available near Washington DC to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Topics to Ask Plumbing Vocational Schools

What to ask Washington DC plumbing schoolsNow that you have decided to obtain a certificate, diploma or degree, you can start to narrow down your training options. Because there are so many plumbing tech and trade schools in the Washington DC area, it’s important to have a checklist of qualifications that each program must meet. The first two that we mentioned were location and tuition expense. And while both qualifiers may be crucial when making your determination, there are additional variables that must be considered also. Following is a checklist of those additional qualifiers that you will need to assess prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  Many plumbing technical programs have earned either a regional or a national accreditation. They can acquire Institutional Accreditation, which focuses on the school’s programs as a whole, or Programmatic Accreditation, which pertains to an individual program, such as electrical technology. Make sure that the Washington DC program and school are accredited by a U.S. Department of Education recognized accrediting organization, for example the Accreditation Board for Engineering and Technology. In addition to helping guarantee that you receive a quality education, it can help in securing financial aid or student loans, which are frequently unavailable for non-accredited programs. Also, many states require that the plumbing training course be accredited in order to be approved for licensing or certification.

Is the Plumbing School Licensed?  Along with accreditation, another way of confirming that a trade school you’re reiewing is reputable is by checking that it’s properly licensed.  Licensing is usually controlled and regulated by state agencies, such as the District of Columbia Department of Education.  If you’re not sure, ask the school which state agency regulates its licensing and then check to ensure that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Washington DC schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are reviewing what their completion rates are. The completion rate is the percentage of students who enroll in and complete the program. A low completion rate may signify that students were disappointed with the course and dropped out. It might also signify that the teachers were not qualified to instruct the students. It’s similarly important that the schools have high job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which can produce more contacts for the school to use for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has an excellent reputation within the field, but additionally that it has the network of contacts to assist graduates secure apprenticeships or jobs in the Washington DC area.

Are Apprenticeship Programs Sponsored?  Most plumber technical programs are taught together with an internship or an apprenticeship program. Those participating trade and vocational schools will help place you in an apprenticeship program within their network of plumbing contractors or labor unions. Check if the schools you are considering have referring partnerships with local Washington DC plumbers or plumbing professionals. An apprenticeship not only offers a rewarding experience by supplying practical training, but it also provides job opportunities and helps to establish relationships in the regional plumbing professional community.

Are there Modern Facilities?  Make sure that the school facilities and the tools that you will be trained on are up-to-date and what you will be using on the job. If you are presently in an internship or an apprenticeship, talk to the master plumber you are working with regarding what you should be expecting. Otherwise, ask a local Washington DC plumbing contractor if they can provide some pointers.

Where is the School Located?  Unless you are able to move, the school needs to be within commuting distance of your Washington DC home. Remember that if you decide to enroll in an out-of-state school, besides the added moving costs there can be increased tuition fees compared to in-state residents.

Are there Smaller Classes?  It’s important that you get as much individualized training as possible, which can be challenging in larger classes. Ask if you can sit in on a couple of the classes so that you can observe how large they are and witness first hand the interaction between teachers and students. Speak to a few of the students and get their opinions relating to class sizes and instruction. Finally, talk with some of the teachers and find out what their level of experience is in Washington DC and what certifications or degrees they hold.

Is the Class Schedule Convenient?  Make sure that the class schedules for the schools you are evaluating are flexible enough to handle your needs. If you are only able to go to classes in the evening or on weekends near Washington DC, verify that the programs you are reviewing provide those choices. If you can only attend part-time, be sure that the school you select offers part-time enrollment. Finally, find out what the protocol is to make-up classes should you miss any due to work, sickness or family issues.

Where to Find Part Time Plumbing Classes Near Me Washington District of Columbia

Washington DC plumbing contractor installing faucetChoosing the ideal plumber training program will probably be the most critical decision you will make to launch your new trade. You originally came to this website because of your interest in Where to Find Part Time Plumbing Classes Near Me and wanting more information on the topic Free Info on Fast Track Plumber Courses. But as we have covered in this article, there are several things that you will need to examine and compare between the training programs you are reviewing. It’s a must that any plumber training program that you are considering includes a good deal of hands-on training. Classes should be small in size and every student should have their own equipment to train with. Classroom instruction should provide a real-world frame of reference, and the curriculum should be up-to-date and conform with industry standards. Training programs differ in length and the kind of credential provided, so you will need to determine what length of program and certificate or degree will best fulfill your needs. Every program provides unique possibilities for certification also. Perhaps The ideal way to research your short list of schools is to visit each campus and talk with the students and instructors. Invest some time to sit in on some classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the right one for you. With the proper training, effort and commitment, you can become a professional plumber in Washington DC.

More District of Columbia Plumbing School Locations

 

 

 

Washington, D.C.

Washington, D.C., formally the District of Columbia and commonly referred to as Washington or D.C., is the capital of the United States.[4] Founded after the American Revolution as the seat of government of the newly independent country, Washington was named after George Washington, the first president of the United States and a Founding Father.[5] As the seat of the United States federal government and several international organizations, Washington is an important world political capital.[6] The city is also one of the most visited cities in the world, with more than 20 million tourists annually.[7][8]

The signing of the Residence Act on July 16, 1790, approved the creation of a capital district located along the Potomac River on the country's East Coast. The U.S. Constitution provided for a federal district under the exclusive jurisdiction of the U.S. Congress, and the District is therefore not a part of any state. The states of Maryland and Virginia each donated land to form the federal district, which included the pre-existing settlements of Georgetown and Alexandria. The City of Washington was founded in 1791 to serve as the new national capital. In 1846, Congress returned the land originally ceded by Virginia; in 1871, it created a single municipal government for the remaining portion of the District.

Washington had an estimated population of 702,455 as of July 2018[update],[9] making it the 20th most populous city in the United States. Commuters from the surrounding Maryland and Virginia suburbs raise the city's daytime population to more than one million during the workweek.[10] Washington's metropolitan area, the country's sixth largest, had a 2017 estimated population of 6.2 million residents.[11]

 

 

Business Results 1 - 10 of 824

Tim Whistler Plumbing and Gas Fitting
104 Reviews
Plumbing, Fireplace Services, Water Heater Installation/Repair
Phone:
Silver Spring, MD 20902

Abe's Plumbing
301 Reviews
Plumbing
Phone:
7237 Calvert St, Annandale, VA 22003

Capitol Handyman
32 Reviews
Handyman, Painters, Plumbing
Phone:
1314 14th St, Ste 100, Washington DC, DC 20005

Payless Plumbing and Heating
84 Reviews
Plumbing, Heating & Air Conditioning/HVAC, Water Heater Installation/Repair
Phone:
Silver Spring, MD 20902

Brookland Plumbing
30 Reviews
Plumbing
Phone:
1611 Monroe St Ne, Washington, DC 20018

Excellence Plumbing
52 Reviews
Plumbing, Water Heater Installation/Repair
Phone:
Washington, DC 20003

1st Choice Plumbing
78 Reviews
Plumbing
Phone:
6506 Asset Dr, Hyattsville, MD 20785

Brian B Quick
63 Reviews
Plumbing, Heating & Air Conditioning/HVAC
Phone:
Brentwood, MD 20722

Marines Plumbing
221 Reviews
Plumbing, Water Purification Services, Water Heater Installation/Repair
Phone:
Fairfax, VA 22032

DC Plumbing & Drain Service
2 Reviews
Plumbing
Phone:
1314 14th St NW, Ste 100, Washington, DC 20005