Category Archives: Mississippi

Accredited Plumbing Vocational Schools Oxford MS

How to Choose the Best Plumber Course near Oxford Mississippi

Oxford MS plumber fixing faucetThe initial step to learning to be a plumbing tradesman or contractor is enrolling in a plumbing school near Oxford MS. But with numerous vocational schools to pick from, just how do you tackle making certain that you enroll in the ideal one? Especially because there are so many points to evaluate. For example, some potential students will start by searching for schools that are close to their residence. When they have found several that are within driving distance, they will decide on the one with the most affordable tuition. While location and cost are important, they are not the sole qualifications that should be considered. Also important are the reputations of the schools, their accreditation, in addition to their job placement and graduation rates. These and other qualifiers should help mold your final decision when choosing a plumber trade school. We will discuss that checklist in greater detail later in this article. But first, let’s review a little bit about becoming a plumber and the instructional choices that are available.

Becoming a Plumber

Oxford MS plumber installing residential water heaterAlmost everyone at one time or another has needed the services of a professional plumber.  It may have been due to a leaky faucet or perhaps a hot water heater needed to be replaced.  Plumbers provide a valuable service for the maintenance of both commercial and residential buildings.  They are skilled tradesmen who are trained in the installation, repair and replacement of plumbing systems.  These systems include pipes, plumbing fixtures, water based heating and cooling, sewage removal and sprinklers.  A local Oxford MS plumber will typically advance through three phases during their professional career.

  • Apprentice. The majority of Oxford MS plumbers begin their careers as an Apprentice.  Apprenticeships are often completed in tandem with a formalized plumbing training program.  Apprentices are typically paid but unlicensed and work under the guidance of a licensed plumber during working hours and attend plumber training classes at night.  The second phase of their career begins once the apprenticeship and the training program have been completed.
  • Journeyman Plumber. Once the apprenticeship has been completed as well as any required training program, application for Journeyman Plumber licensing can be made.  Most often licensing is controlled by the state but can be managed more locally at the county or city level.  A Journeyman license will only be issued after all requirements have been met, including a passing score on the licensing exam. Even though a Journeyman is more knowledgeable and experienced than an Apprentice, they generally must continue to be supervised, in this case by a Master Plumber.
  • Master Plumber. After attaining the necessary work experience and completing any additional educational requirements, the Journeyman can apply to become a Master Plumber.  Once again a passing score must be achieved on the licensing exam before a license will be issued.  There are several benefits to advancing to the Master Plumber level, including earnings at the highest pay level, unsupervised working conditions, and the ability to start and own a business.  Master Plumbers may also hire and supervise both Journeymen and Apprentices.

As a technical field requiring a high level of skill and competence, plumbing can take years of both training and experience to master.  As a consequence, the best opportunity for success for a new Apprentice in Oxford MS is to enroll in a plumbing technology program that will provide the comprehensive quality training needed to embark on this challenging career.

Click Here to Get Free Information on Plumbing Schools Near You!

Plumbing Certificate and Degree Programs

Oxford MS plumber installing sinkThere are several educational options available near Oxford MS to receive the necessary training to begin your career as a plumber.  As far as the schools offering programs, you can enroll in a trade, technical or vocational school as well as a local community college.  The programs offered will vary, but in general the shortest is the certificate program which will focus on the fundamentals and generally take about a year to complete.  An Associate Degree will take 2 years to complete and will provide a more comprehensive education.  There are some colleges that do offer a Bachelor Degree in plumbing technology, which are 4 year programs and much broader in nature.  When choosing a school and program, naturally the completion time and the cost will be important factors.  Tuition can vary significantly among the various schools and colleges and for some private schools can be quite expensive.  State schools and community colleges typically offer their programs at the lower end of the tuition scale.  However, when making your comparisons, keep in mind that many schools offer financial aid and even scholarships to help offset some of the financial burden.  So be sure to find out what is available for each school and program before making your final decision.

Things to Ask Plumbing Training Schools

What to ask Oxford MS plumbing schoolsWhen you have made a decision to obtain a certificate, diploma or degree, you can begin to narrow down your school options. Since there are so many plumbing vocational and trade schools in the Oxford MS area, it’s essential to have a checklist of qualifications that each program must satisfy. The initial two that we mentioned were location and tuition expense. And while both qualifiers may be crucial when making your decision, there are additional factors that must be considered also. Below is a checklist of those additional qualifications that you will need to assess prior to choosing a plumber technical school.

Is the Plumbing School Accredited?  A large number of plumbing vocational programs have earned either a regional or a national accreditation. They may acquire Institutional Accreditation, which focuses on the school’s programs overall, or Programmatic Accreditation, which relates to an individual program, for example electrical technology. Verify that the Oxford MS program and school are accredited by a U.S. Department of Education recognized accrediting agency, which includes the Accreditation Board for Engineering and Technology. Along with helping ensure that you acquire a quality education, it may help in obtaining financial aid or student loans, which are often not available for non-accredited schools. Additionally, some states require that the plumbing training course be accredited for it to be approved for licensing or certification.

Is the Plumbing School Licensed?  In addition to accreditation, an additional way of confirming that a vocational school you’re considering is reputable is by making sure that it’s properly licensed.  Licensing is typically controlled and regulated by state agencies, such as the Mississippi Department of Education.  If you’re not sure, ask the school which state agency is responsible for its licensing and then verify that it’s up to date.

How Long has the School been in Business?  Another means of determining the quality of a technical school is to find out how long it’s been in business.  The longer a school has been in operation, the more likely that its programs are highly rated and regarded. Conversely, schools that are not well regarded or that provide low quality training generally don’t stand the test of time.  However, keep in mind that even the best of Oxford MS schools had to start from their first day of operation, so only use it as one of several qualifications for each school you are considering.

What are the School’s Completion and Placement Rates?  Ask the plumbing training programs you are considering what their completion rates are. The completion rate is the percentage or portion of students who enroll in and complete the program. A lower completion rate might signify that students were unhappy with the program and quit. It might also indicate that the instructors were not qualified to instruct the students. It’s similarly essential that the schools have higher job placement rates. Older and/or more reputable schools may have a more extensive list of alumni, which may mean more contacts for the school to employ for their apprenticeship and job placement programs. A high job placement rate can not only validate that the school has a good reputation within the field, but also that it has the network of contacts to assist students secure apprenticeships or jobs in the Oxford MS area.

Are Apprenticeship Programs Sponsored?  A large number of plumber vocational programs are taught together with an internship or an apprenticeship program. Those participating vocational and trade programs will help place you in an apprenticeship program within their network of plumbing companies or labor unions. Find out if the schools you are comparing have working partnerships with local Oxford MS plumbers or plumbing contractors. An apprenticeship not only offers a valuable experience by furnishing hands-on training, but it also furnishes employment opportunities and helps to form relationships in the regional plumbing professional community.

Are there Modern Facilities?  Confirm that the campus facilities and the equipment that you will be trained on are state-of-the-art and what you will be working with in the field. If you are presently in an internship or an apprenticeship, consult with the master plumber you are working with regarding what you should be expecting. If not, ask a local Oxford MS plumbing contractor if they can provide some tips.

Where is the School Located?  Unless you are able to relocate, the school must be within driving distance of your Oxford MS home. Take note that if you decide to attend an out-of-state school, besides the added moving costs there can be increased tuition charges compared to in-state residents.

Are there Smaller Classes?  It’s important that you get as much one-on-one training as possible, which can be difficult in bigger classes. Ask if you can monitor some of the classes so that you can observe how large they are and witness first hand the interaction between students and instructors. Speak to some of the students and get their comments relating to class sizes and instruction. Last, talk with some of the instructors and learn what their level of experience is in Oxford MS and what degrees or certifications they have earned.

Is the Class Schedule Convenient?  Verify that the class schedules for the programs you are assessing are flexible enough to meet your needs. If you are only able to go to classes at night or on weekends near Oxford MS, verify that the schools you are looking at offer those choices. If you can only attend on a part-time basis, make sure that the school you select permits part-time enrollment. Also, find out what the policy is to make-up classes should you miss any due to work, sickness or family issues.

Accredited Plumbing Vocational Schools Oxford Mississippi

Oxford MS plumbing contractor installing faucetPicking the best plumber trade school will undoubtedly be the most critical decision you will make to launch your new profession. You originally came to this website because of your interest in Accredited Plumbing Vocational Schools and wanting more information on the topic Where to Find Fast Track Training For Plumbers. But as we have covered in this article, there are a number of factors that you will need to assess and compare among the schools you are considering. It’s a necessity that any plumbing tech school that you are evaluating includes a good deal of hands-on training. Classes need to be smaller in size and every student must have their personal equipment to train with. Classroom education should offer a real-world perspective, and the curriculum should be up-to-date and in-line with industry standards. Courses vary in duration and the type of credential offered, so you will need to ascertain what length of program and credential will best satisfy your needs. Every training program provides different options for certification as well. Perhaps The ideal means to research your short list of schools is to go to each campus and talk with the teachers and students. Invest some time to attend some classes. Inspect the campus and facilities. Make sure that you are confident that the school you select is the right one for you. With the proper training, hard work and commitment, you can become a professional plumber in Oxford MS.

More Mississippi Plumbing School Locations

  • Guide to Evening Plumber Training Near Me Batesville MS
  • Plumber Vocational Schools Long Beach MS
  • Become A Plumber Horn Lake MS
  • Guide to Part Time Plumbing Courses Booneville MS
  • Plumber Training School Laurel MS
  • Accredited Plumbing Trade Schools Meridian MS
  • Plumber Class Guntown MS
  • Where to Find Accredited Plumber Classes Near Me University MS
  • Where to Find Local Plumbing Classes Near Me Richton MS
  • Plumber Trade Schools Hamilton MS
  •  

     

     

    Oxford, Mississippi

    Oxford is a city in, and the county seat of, Lafayette County, Mississippi, United States. Founded in 1837, it was named after the British university city of Oxford in hopes of having the state university located there, which it did successfully attract.

    As of the 2010 US Census, the population is 18,916; the Census Bureau estimates the city's 2017 population at 23,639.[4] Oxford is the home of the University of Mississippi, founded in 1848, also commonly known as "Ole Miss".

    Oxford and Lafayette County were formed from lands ceded by the Chickasaw in the Treaty of Pontotoc Creek in 1832. The county was organized in 1836, and in 1837 three pioneers—John Martin, John Chisom, and John Craig—purchased land from Hoka, a female Chickasaw landowner, as a site for the town.[5] They named it Oxford, intending to promote it as a center of learning in the Old Southwest. In 1841, the Mississippi legislature selected Oxford as the site of the state university, which opened in 1848.

     

     

    Business Results 1 - 10 of 5

    Rick's Plumbing And Electric
    2 Reviews
    Electricians, Plumbing, Generator Installation/Repair
    Phone:
    11 County Rd 324, Oxford, MS 38655

    Hughes Brothers Plumbing
    1 Reviews
    Plumbing, Irrigation, Contractors
    Phone:
    99 Hughes Dr, Byhalia, MS 38611

    ABC Plumbing & Septic Service
    3 Reviews
    Plumbing, Septic Services, Hydro-jetting
    Phone:
    741 Lee Creek Rd, Byhalia, MS 38611

    Rooter-Man
    1 Reviews
    Plumbing, Water Heater Installation/Repair, Septic Services
    Phone:
    5075 Macon Rd, Memphis, TN 38122

    G & R Services
    3 Reviews
    Heating & Air Conditioning/HVAC, Plumbing, Air Duct Cleaning
    Phone:
    8608 Rosemark Rd, Millington, TN 38053